Company News

The following photos are the cargo packaging and delivery site. All towers are wrapped with foam cotton to prevent bumps.   

On June 15, we were honored to welcome our Philippine customers to visit our factory. They mainly visited the angle steel production line, hot-dip galvanizing workshop and monopole tower production line.  In addition, a communication tower project in our country happened to be under construction near the factory. The customer also visited the construction site and expressed his appreciation for our construction process. In the office, we also showed the customer the artificial palm leaves of the current palm tree telecom tower and presented the test report to show the quality.

The picture shows the packaging of the tubular steel transmission tower before transportation. The packaging form is general seaborne packaging. The overall thickness of the zinc layer of the steel pipe tower is more than 100 microns, and the thinnest part is also more than 85 microns.    

The picture below shows the inspection and packaging of the 3-legged angle steel communication tower. At the same time, we once again tested the zinc layer thickness of different sections to ensure that they all meet the ASTM A123 standard.   

The picture shows the trial assembly site of a 50-meter three legged angle steel tower. Due to the width of the foundation, only 30 to 40 meters of height can be assembled, but it has been confirmed that the pre-galvanizing processing and various processes have no quality. The next step is hot-dip galvanizing, which will also be strictly carried out in accordance with ASTM A123 standards.

Utility steel poles are tall, vertical structures made of steel that are commonly used in various utility applications to support overhead power lines, communication cables, street lights, and other utility equipment. These poles are designed to withstand various environmental conditions and provide reliable support for essential utility services.  

The following pictures show the 35-meter monopole telecommunication tower being packed and shipped. The tower body is wrapped with cloth to protect it from damage during transportation. Climbing belts are also used in the container to fix the tower body to prevent shaking and ensure the safety of customers' unloading. The part where the bottom of the single-tube tower contacts the container is also padded with wood to prevent damage caused by friction during transportation.  

One lot of telecom monopole tower components has been packaged and shipped to U.S.. Most of the products are monopole tower access port. And as well as hot-dip galvanized metal parts.   

The following pictures show the monopole antenna pole packing site and packaging reference. The antenna pole is packed with flannel cloth and stainless steel rolled tape.   Also packed are the artificial palm leaves of the bionic palm tree tower. Palm leaves are packed in cartons for protection, 50 leaves per box. Every two branches are packed into a bundle, which is convenient for customers to unload.   

The following pictures show the trial assembly of the leaves of the  palm tree monopole tower and some technical parameters. The branches are made of fiberglass and do not contain steel bars. The leaves are made of PE material and have no impact on the frequency band of mobile communication signals. And the length of the foliage can be OEM from 3m to 4.5m as per the client's demand.    

The following pictures show the packaging of the three-legged angle steel communication tower. They are all suitable packaging methods for sea transportation, and bumps are avoided as much as possible during the packaging process.    

The following pictures show the packaging site of the 45 Meters 3-Legged Angle Steel Telecom Tower before delivery. We use flannel to pack the angle steel parts at the beginning and end, and fix them with stainless steel binding tape. The remaining parts are connected in sequence with iron wire to prevent omission and confusion.